MP35 Resin is a copolymer of 75% vinyl chloride and 25% vinyl isobutyl ether. The latter component gives it excellent bonding properties and can be used for Anti-Corrosion Paint..Such as: Container, Marine, industrial paint.....
MP15 resin is applied for thick-form paint, because it remains well under the condition of acid/alkali, it could be applied to the alkali basic material, such as: asbestos, concrete and brick, so it could be mixed in paint for swimming pools, construction, bridges and road marking.
MP15 resin is applied for thick-form paint, because it remains well under the condition of acid/alkali, it could be applied to the alkali basic material, such as: asbestos, concrete and brick, so it could be mixed in paint for swimming pools, construction, bridges and road marking.
Our MP45 resin are a good type of chlorinated binder. It is especially good for making solvent type gravure ink & plastic composite ink (OPP & PE).
Our SM-550 Type has good stability, good solvent liberation, strong bending flexure, marvelous glossiness, strong adhesive power, fine gel resistance and indoor temperature turn-frost, widely used in various printing ink fields.
This resin is mainly used in gravure plastic printing inks and paper printing inks.The printing ink which is made from this polyamide resin has good adhesion, high gloss, low freezing point, good solvent release and good compatible with nitrocotton.
Low freezing point co-soluble polyamide resin, which has well cold resisting property and indoor temperature turn frost compared with same kind of resin, which has good adhesion, excellent compatibility, good stability and high glossiness.
We can supply Polyamide resin Alcohol Soluble in different types. Our goods are good compatibility with NC,superior freezing,water and gel resistance, good gloss, fluidity and pigment wetting property.
SM-600 performs stable characteristics, good resistance to high temperature, good solvent release, high gloss and good adhesion. It is used in printing inks, especially used for surface printing ink on PE.PP at high temperature.
Our SM-650 is made from dimer and amines. It performs good solubility in ester, good solvent release, high gloss and good adhesion, good resistance to bend. It is used in printing inks, especially used for Gravure/Flexographic printing ink on PE,PP.
Our SM-556 has excellent adhesion to untreated PE/PP, good pigment dispersion. It could be applied to printing ink which does not use nitrocellulose.
Friendly Links :
www.sunmanchem.com
IPv6 network supported 
